Wood-plastic floor installation

Wood-plastic floor installation method

1, Before the construction of wood plastic floor preparation, to ensure that the construction site of the concrete base ground level, if there is a problem should be repaired before laying.

2. For the fixation of wood-plastic keel, the expansion tube is used to fix the wood-plastic keel directly on the ground. The spacing between the fixed points of the plastic expansion tube is 500mm~600mm, and the screw cap is required to be lower than the surface of the wood-plastic keel.

3, keel center distance control between 310-410mm, keel end butt joint need to leave about 10mm spacing, easy to drain, at the same time to do between the keel row and row end seam staggered, not in a straight line. Keel spacing allows error <10mm, flatness <3mm, and the expansion joint between the wall is 8-10mm.

4, the construction site of the basic ground construction conditions are poor, can not achieve the stability of the topic structure, need to use steel keel instead of wood plastic keel, the use of just to use galvanized steel, welding link to remove welding slag back seat rust treatment.

5. The size of the floor splicing gap should be reasonably determined according to the temperature and humidity of the environment when the wood-plastic floor is installed, the length of the floor, the moisture content of the floor, and the specific situation of the laying area.